Patch Management Requirements
- 28 Sep 2023
- 1 Minute to read
- Print
- DarkLight
- PDF
Patch Management Requirements
- Updated on 28 Sep 2023
- 1 Minute to read
- Print
- DarkLight
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
If you are using the SysAid server and/or the RDS, make sure you also consider the requirements in the SysAid Server requirements and the RDS requirements.
Example 1: Let's say you are using the SysAid server to manage 600 assets, and 300 of them are Patch Management enabled. Aside from the 2 GB of RAM and 4 GB of HD space required for the SysAid server, you also require an additional 4 GB of RAM and 10 GB of HD Space for Patch Management capabilities. In total, you would require 6 GB of RAM and 14 GB of HD space for the SysAid Server.
Example 2: Let's say you are using SysAid RDS in one of your branches to manage 200 assets, and 100 of them are Patch Management enabled. Aside from the required 2 GB of RAM and 400 MB of HD space required for the RDS, you will also need an additional 4 GB of RAM and 10 GB of HD Space for Patch Management capabilities. In total, you would require 6 GB of RAM and 10 GB + 400 MB of HD Spacefor the SysAid RDS.
| Component | Minimum Requirement | ||
|---|---|---|---|
| 1-100 Assets | 100-500 Assets | 500-1000 Assets |
RAM | 2 GB | 4 GB | 8 GB |
HD space | 5GB | 10 GB | 20 GB |
Internet Connection Bandwidth | 1544 kbps | 1544 kbps | 1544 kbps |
Note:
A single SysAid RDS node (or SysAid server) can support up to 2000 Patch Management enabled assets. To enable Patch Management on more than 2000 assets, you must use additional RDS nodes.
Was this article helpful?
.png)